Arduino IDE and Drivers Installation (Windows XP)

Arduino UNO and Arduino Mega Software and Drivers Installation

This tutorial describes the installation of the Arduino IDE Development software and drivers for the Windows Operating System. The images and description is based on installation under Windows XP, but the process should be similar for Vista and Windows 7.

First we need to get the latest version of the Arduino software this can be downloaded from the Arduino website here
Download the Arduino software and unzip all the files into c:\program files
You will end up with a directory like arduino-0021 or similar

 


Arduino IDE and Drivers Installation Next, plug in your Arduino board to your computer with a USB cable and wait while Windows detects the new device.
Windows will fail to detect the device as it doesn't know where the drivers are stored. You will get an error similar to the one right.
Select the Install from a list or specific location (Advanced) option and click Next

 


Arduino IDE and Drivers Installation Now choose the location that the Arduino drivers are stored in. This will be in a subfolder called drivers in your arduino directory

 


Arduino IDE and Drivers Installation After selecting Next you may get a message like the one shown right.
Select Continue Anyway

 


Arduino IDE and Drivers Installation Windows should now have found the Arduino drivers. Click Finish to complete the installation

 


Arduino IDE and Drivers Installation So far so good. The computer communicates with the Arduino board via a special serial port chip built into the Arduino board. The Arduino IDE software needs to know the serial port number that Windows has just allocated to it
Open the Windows Control Panel and select the System app.
Click on the Hardware tab and then on the Device Manager button.
Click on the Ports (COM and LPT) option and note what com port has been allocated to the Arduino Board

 


Arduino IDE and Drivers Installation Next, run the Arduino IDE application, which will be in c:\program files\arduino-0021 or similar

Click on Tools | Serial Port and select the port number from above

 


Arduino IDE and Drivers Installation Next click on Tools | Board and select the type of board that you have

 


Arduino IDE and Drivers Installation Thats it. Now try opening the Blink demo program from the example directory within the Arduino IDE, Verify/Compile it and upload it to your board. You should see the TX and RX leds on the board flash showing you that it is working.
Finally the built in LED connected to Pin 13 will flash. Thats your first program running.
Enjoy

 


One final note. Create a shortcut to the Arduino IDE and place it on your desktop

Shopping Cart
0 items
 
DELIVERY/PAYMENT

Free Delivery Orders over £50

UK - £2.40 orders under £50
Airmail from £2.95 (+VAT)
More Details...

 
Brands
 
 Check out our videos
Follow us on:
acebook