Breakout Board for FT232RL USB to Serial
 Click to enlarge |
 |
Breakout Board for FT232RL USB to Serial
Basic breakout board for FTDI's popular USB to UART IC. Now with internal oscillator and EEPROM, the FT232RL is an impressive IC!
VCCIO is now tied to 3.3V through a solder jumper. (There are 3 solder pads above and to the right of the chip). To convert to 5V operation remove the solder link between the middle pad and the left pad (3.3V) and solder a link between the middle pad and the right pad (5V).
For more information on how to wire VCCIO for 5V, checkout this mini-tutorial on the SparkFun forum.
Board comes assembled with IC as shown.
Features:
- Implements full v2.0 USB protocol
- Needs no external crystal
- Internal EEPROM for device ID and Product Description strings
- Royalty-Free Driver support for Windows, Linux, and Mac OSX
Documents:
FT232RL Breakout Schematic
FT232RL Datasheet
FT232RL IC Datasheet
FTDI Utlity Programs
Drivers
Write Review
Your Name:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
Click to enlarge
Click to enlarge
 USB to TTL Serial USBTTL £4.00 |
 FT232RL - USB to UART Bridge FT232RL £3.50 |
 Arduino Pro 328 - 5V/16MHz ARDUINOPRO328 £14.95 |
 FTDI Basic Breakout - 5V FTDIBASIC £9.95 
|
 FTDI Basic Breakout - 3.3V FTDIBASIC3 £10.43 |
 FT232RL USB to Serial DIL Breakout FT232RLBB £4.80 |
 Breadboard Arduino (breadboarduino) BREADBOARDUINO £19.94 
|
 ATmega644 with Arduino Bootloader ATMEGA644ARDUINO £7.99 |
Shopping Cart
DELIVERY/PAYMENT
Specials
Featured
Categories
Brands
Information
