6-Conductor Ribbon Cable with IDC Connectors 12 inch
 Click to enlarge |
 |
This 12" (30 cm), 6-conductor ribbon cable has a female 2×3 IDC connector on each end that is designed to plug into a 0.100" (2.54 mm) 2×3 shrouded box header. It can also be used with 0.100" male header pins.
This cable is well suited to serve as an AVR ISP programming cable, or it can simply serve as a custom cable for your electronics project.
If you need a custom length cable, they are extremely easy to make up using..
The ribbon cable can be crimped into the IDC sockets using a vice (or a pair of pliers)
Write Review
Your Name:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
There are no additional images for this product.
 IDC Socket 2x3 pin 0.1in Female IDC23 £0.30 |
 Shrouded Box Header 2x3 pin BOXHEAD23 £0.24 |
 IDC Socket 2x5 pin 0.1in Female IDC25 £0.30 |
 Shrouded Box Header 2x5 pin BOXHEAD25 £0.25 |
 10-Conductor Ribbon Cable with IDC Connectors - 12 inch IDCRIBBON10 £1.25 |
 6-Conductor Ribbon Cable with IDC Connectors 6 inch IDCRIBBON6-6 £0.89 |
10-Conductor Ribbon Cable with IDC Connectors 6 inch IDCRIBBON10-6 £1.15 |
 Shrouded Box Header 2x8 pin BOXHEAD28 £0.29 |
 IDC Socket 2x8 pin 0.1in Female IDC-2x8 £0.35 |
 Arduino AVR ISP Programming Shield Kit DEV-11168 £13.49 |
 Shrouded Box Header 2x13 pin BOXHEAD213 £0.34 |
 IDC Socket 2x13 pin 0.1in Female IDC-2x13 £0.38 |
Shopping Cart
DELIVERY/PAYMENT
Specials
Featured
Categories
Brands
Information
