PIC18F26K20 DIL 28, 8-BIT, 64K FLASH with BOOTLOADER
![]() Click to enlarge |
![]() |
This is the Microchip 18F26K20 with the ds30Loader Bootloader installed. This means you can program the chip with only a serial connection. For more details see our Microchip Bootloader Tutorial
The bootloader code sets the microcontroller to
- UART Baud rate 115200 (which may be modified in your program)
- Oscillator: Internal 16MHz
And has the following CONFIG settings which should NOT be included in your own program
- FOSC = INTIO67 (Intenal Oscillator)
- WDTEN = OFF
- BOREN = OFF
- PWRT = ON
- MCLRE = ON
- LVP = OFF
- HFOFST = OFF
PIC 18F26K20 - 28 Pin DIP microcontroller
| Program Memory Type | Flash |
| Program Memory (KB) | 64 |
| CPU Speed (MIPS) | 16 |
| RAM Bytes | 3,936 |
| Data EEPROM (bytes) | 1024 |
| Digital Communication Peripherals | 1-A/E/USART, 1-MSSP(SPI/I2C) |
| Capture/Compare/PWM Peripherals | 1 CCP, 1 ECCP |
| Timers | 1 x 8-bit, 3 x 16-bit |
| ADC | 10 ch, 10-bit |
| Comparators | 2 |
| Temperature Range (C) | -40 to 125 |
| Operating Voltage Range (V) | 1.8 to 3.6 |
| Pin Count | 28 |
| XLP | Yes |
Schematic

Datasheet
Write Review
Your Name:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:

Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
There are no additional images for this product.









Shopping Cart
DELIVERY/PAYMENT

Specials


Featured








Categories
Brands
Information




