Raspberry Pi GPIO Cable 12in
 Click to enlarge |
 |
Raspberry Pi GPIO Cable 12in
This useful cable connects to the Raspberry Pi GPIO (general purpose input/output) 26 pin header.
You can then connect this to your own PCB, stripboard, project etc. Pin #1 is marked with the red wire.
Length: 12in
NOTE: We Make these cables up with the strain relief clip attached to the IDC connectors. This makes the connector too high if the Raspberry Pi is to be housed in a case. The strain relief clip will need to be removed if used with a case.
Write Review
Your Name:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
There are no additional images for this product.
 Slice of Pi - Raspberry Pi Add-on Prototyping board SLICEOFPI £4.62 |
 Raspberry Pi GPIO Cable 6in RPICAB6 £2.40 
|
 Shrouded Box Header 2x13 pin BOXHEAD213 £0.34 |
 Raspberry Pi GPIO Breakout Board Kit RPI-BREAKOUT £2.40 
|
 IDC Socket 2x13 pin 0.1in Female IDC-2x13 £0.38 |
 Raspberry Pi GPIO Breakout Board Kit *PRO RPI-BBPRO £4.50
|
 Raspberry Pi Stacking Header - 2x13 Extra Tall RPI-HEAD-L £1.94 |
 Female Header Socket 0.1inch - 2x13 Extra Tall FHEAD2x13ET £1.26 |
Shopping Cart
DELIVERY/PAYMENT
Specials
Featured
Categories
Brands
Information
