Raspberry Pi Stacking Header - 2x13 Extra Tall
![]() Click to enlarge |
|
Raspberry Pi Stacking Header - 2x13 Extra Tall
This custom-made extra-tall 2x13 female header with extra-long pins allows you to add your own prototyping board onto your Raspberry Pi. The female header part has extra spaces to make it 13.6mm tall: when placed on your Pi, a PCB will clear the Ethernet and USB jacks.
The pins are also extra-long, 9.7mm, so that when a standard 1.5mm thickness PCB is installed, there will be 8mm remaining, plenty to plug a 6in or 12in Raspberry Pi cable into, or even to add another stacking header and pcb layer.
We also have these same female headers with standard length 3.5mm pins
![]() Shrouded Box Header 2x20 (40) pin BOXHEAD220 £0.54 |
![]() Raspberry Pi B+ 40pin GPIO Cable 6in RPICAB6-40 £2.40 |
![]() Female Header Socket 0.1inch - 2x13 Extra Tall FHEAD2x13ET £0.90 |
![]() Female Header Socket 0.1inch 2x13 FHEAD2x13 £0.54 |
![]() IDC Socket 2x13 pin 0.1in Female IDC-2x13 £0.42 |
![]() Shrouded Box Header 2x13 pin BOXHEAD213 £0.34 |
![]() Raspberry Pi GPIO Cable 12in RPICAB12 £2.64 |
![]() Raspberry Pi GPIO Cable 6in RPICAB6 £2.40 ![]() |
Write Review
Your Name:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:

Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: