ScanaPLUS: 9-Channels, 100MHz Logic Analyzer

IKALogic ScanaPLUS: 9-Channels, 100MHz Logic Analyzer
Click to enlarge
Manufacturer: IKALogic
Average Rating: 5 out of 5 Stars!


ScanaPLUS: 9-Channels, 100MHz Logic Analyzer

ScanaPLUS (V2) is a robust, versatile and multi-application 9 Channels logic analyzer. It relies on the free ScanaStudio software to capture and analyze logic signals.

This logic analyzer will capture signals at a steady rate of 100 MSPS (Million Samples Per Seconds), whether you’re using 1 or all 9 channels. No compromises.

Thanks to its configurable and fully protected input stage, ScanaPLUS can be directly connected to RS232, to CAN or RS485 differential lines, or to tiny 1.2V logic signals!

Plus, a logic analyzer with 9 channels, will allow you to work with 8-bit buses, having a 9th channel left for a synchronization signal.

Worry no more about maximum capture time or transfer speed from device to computer. ScanaPLUS relies on a proprietary FPGA based compression and streaming algorithm, that will capture signals for as long as your computer can take!

There are 3 modes of operation.

Mode Sampling rate /
Maximum input
Typical applications
1-CH mode 100MSPS / ±10ns 1 25 MHz - Frequency measurements
- Signal stability measurements
- High speed PWM analysis
4-CH mode 100MSPS / ±10ns 4 16 MHz - High speed SPI signals capture and analysis
- High speed UART capture
- I2S High frequency audio signals analysis
9-CH mode 100MSPS / ±10ns 9 8 MHz - All lower frequencies communication interfaces
(UART, I2C, CAN, RS232, LIN, 1-Wire, etc..)
- 8-Bit parallel bus capture and analysis

Integrated CAN, LIN, RS232 and RS485 receivers!

With ScanaPLUS logic analyzer, you don’t neet to worry about converting differential signals to TTL signals. It has got 2 differential bus receivers ready to sniff any CAN or RS485 communication. Additionally, it can be connected to 5 RS232 or LIN lines. Thanks to the broad input range, more protocol and signaling levels can be added via software updates.

ScanaPLUS adapts to your logic signals levels.

ScanaPLUS will allow you to capture logic transition whose logic levels are as low as 1.2v and all the way up to 5V logic levels. While configuring the exact threshold voltage is not critical for most application, it will give you much better accuracy when measuring  high frequency signals (above 1MHz).

Do you need to capture 1.8 v signals on some pins, while capturing 5V signals on others? No problem, with ScanaPLUS you can define 2 different logic thresholds for two groups of inputs!

We’ve selected the finest hook probes for you.

At Ikalogic, we are electronics engineers after all  and we know how much it is important to have good quality probes when attempting to debug a digital electronic circuit. That’s why we provide with each ScanaPLUS device 10 Ultra fine, USA made, E-Z hook probes. They are all color coded to match the cables and the software interface. This way, you can know which channel is connected to what in a glance.

Product Features

  • 100 MSPS (Million samples per second).
  • Accuracy: ± 10 ns
  • Maximum capture time: 1000 seconds *
  • Number of channels: 9.
  • Dimensions: 73 x 46 x 17 mm (2.87 x 1.81 x 0.67 inches)
  • Weight: 59 gm (2.08 oz)

*(Maximum capture time of 1000 seconds is only limited by software capabilities, it may be increased via future software updates)


Input features and characteristics

  • Number of adjustable logic threshold groups: 2
  • Adjustable logic levels for each group: 1.2V, 1.5V, 1.8V, 2.8V, 3.3V to 5V
  • Number of integrated receivers for RS232 bus: 5
  • Number of integrated receivers for LIN bus: 5
  • Number of integrated differential lines receivers: 2 (can used for CAN, RS485, etc.)
  • Activity LED integrated to ScanaPLUS device quickly indicates logic change on any line
  • Input operating range ± 35V
  • Absolute maximum input range ± 50V
  • Input impedance 100KΩ || 5pF

Sophisticated Trigger options

  • Configurable trigger event types: Rising edge, Falling edge, Logic level, Pulse width
  • Multi-channel trigger support: Yes
  • Number of cascaded events to trigger: Unlimited number of events

Software characteristics summary

ScanaPlus Software

  • Compatible with ScanaStudio V2.0 and above. (Multi-workspace, features rich environment used for device configuration, signal visualization and protocol decoding)
  • Supported protocols (regularly updated) UART, SPI, I2C, 1-wire, CAN, LIN 1.x & LIN2.x
  • Custom protocol decoder writing feature.
  • Export printer friendly images Yes. Perfectly adapted to report writing
  • Compatible Operating systems:
    • Windows: Windows XP, Vista, and 7 (32 or 64 bit)
    • Linux: Recent Ubuntu (32 or 64 bit)
  • Minimum system requirements USB 2.0 Port, 512MBytes of RAM


Scanaplus Specification Sheet
ScanaStudio Download



Write Review
Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:

ScanaPLUS: 9-Channels, 100MHz Logic Analyzer
Click to enlarge
ScanaPLUS: 9-Channels, 100MHz Logic Analyzer
Click to enlarge
ScanaPLUS: 9-Channels, 100MHz Logic Analyzer
Click to enlarge
ScanaPLUS: 9-Channels, 100MHz Logic Analyzer
Click to enlarge
ScanaPLUS: 9-Channels, 100MHz Logic Analyzer
Click to enlarge
ScanaPLUS: 9-Channels, 100MHz Logic Analyzer
Click to enlarge
ScanaPLUS: 9-Channels, 100MHz Logic Analyzer
$ 144.00 New In Stock
Shopping Cart
0 items

Free Delivery Orders over £50

UK - £2.40 orders under £50
Airmail from £2.95 (+VAT)
More Details...

 Check out our videos
Follow us on: