RFM69CW 433MHz Wireless Transceiver

RFM69CW 433MHz Wireless Transceiver
Click to enlarge
Price: £4.20
(£3.50 + VAT)
Stock Quantity: 80
Model: RFM69CW
Average Rating: Not Rated

RFM69CW Wireless Transceiver

The RFM69CW is a pin-compatible upgrade to the polular RFM12B radios.

The RFM69CW offers improved sensitivity and range compared to the RFM12B (+30%) at the cost of a small increase in power consumption. The new module also supports RSSI which is a useful addition.

The module is a great inexpensive option for wireless communication; it's an ISM band FSK transceiver module implemented with a unique PLL. These modules operate in the 434MHZ band and fully comply with FCC and ETSI regulations.

This module has a wide voltage supply range of 2.2-3.8VDC. An SPI interface is used to send data and configure the RFM69CW module. The configuration commands, described in the RFM69CW IC Datasheet linked below, can be used to set the data rate, frequency band, wake-up timer, transfer data, receive data from the 16-bit FIFO, and much more.

The module comes in a 14-pin SMD package, with pins spaced by 2mm. The pins now usefully have holes which makes it much easier to solder wires to, and the pin definitions are displayed on the reverse of the board.

Arduino Library

There is an excellent RFM69CW Arduino Library available from LowPowerLabs. However, their example code is intended for their own boards which include a Flash RAM chip. This code needs removing in order to work correctly, so we have included the two example programs for Node and Gateway below which we have modified to work.

Aerial Length

A suitable quarter wave whip aerial (i.e. length of wire) should have a length of 16.5cm

Features:

  • 1.8V-3.6V power supply
  • +13 dBm Power Output Capability
  • Operates on 433MHz unlicensed ISM band
  • Built in AES-128 encryption and CRC-16 engine
  • FSK Bit rates up to 300 kb/s
  • High Sensitivity: down to -120 dBm at 1.2 kbps
  • Packet engine with 66-byte FIFO
  • Built-in temperature sensor
  • Line-of-sight ranges in excess of 1km
  • High Selectivity: 16-tap FIR Channel Filter
  • Bullet-proof front end: IIP3 = -18 dBm, IIP2 = +35 dBm,80 dB Blocking Immunity, no Image Frequency response
  • Low current: Rx = 16 mA, 100nA register retention
  • Programmable Pout: -18 to +13 dBm in 1dB steps
  • Fully integrated synthesizer with a resolution of 61 Hz
  • FSK, GFSK, MSK, GMSK and OOK modulations
  • Built-in Bit Synchronizer performing Clock Recovery
  • Incoming Sync Word Recognition
  • 115 dB+ Dynamic Range RSSI
  • Automatic RF Sense with ultra-fast AFC
  • Module Size:16X16mm

Documents:

 

Write Review
Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:

RFM69CW 433MHz Wireless Transceiver
Click to enlarge
RFM69CW 433MHz Wireless Transceiver
Click to enlarge
RFM69CW 433MHz Wireless Transceiver
$ 4.20 New In Stock
Shopping Cart
0 items
 
DELIVERY/PAYMENT

Free Delivery Orders over £50

UK - £2.40 orders under £50
Airmail from £2.95 (+VAT)
More Details...

 
Brands
 
 Check out our videos
Follow us on:
acebook