Arduino Compatible Nano V4

The Arduino Nano V4 is a small, complete, and breadboard-friendly board based on the ATmega328. It differs from our other Nano V3 board in using a Prolific PL2303 chipset instead of the FTDI chip in the Nano V3.

It has more or less the same functionality of the Arduino Uno, but in a different package. It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one. It includes a USB to Serial chip so only needs a USB cable (NOT suppied) in order to program it.

Specifications:

Atmel ATmega328 MCU
Operating Voltage (logic level) 5 V
Input Voltage (recommended) 7-12 V
14 Digital I/O Pins (of which 6 provide PWM output)
8 Analog Input Pins
DC Current per I/O Pin 40 mA
32Kb Flash Memory (of which 2KB used by bootloader)
2 KB SRAM
1 KB EEPROM
16MHz Clock Speed
Dimensions 0.7 inch x 1.7 inch (18mm x 43mm)

Documents

Arduino Nano Product Page
Prolific Serial Driver

Programming Note

If you have issues sending scripts to your new nano and are using the Arduino program to upload scripts, try setting the processor to "'Atmega 328 (old bootloader)" as this seems to be the setting required currently.