SCANALOGIC 2 PRO - PC based logic analyzer and signal generator

IKALogic SCANALOGIC 2 PRO - PC based logic analyzer and signal generator
Click to enlarge
Model: SCANALOGIC2
Manufacturer: IKALogic
Average Rating: 5 out of 5 Stars!

IKALogic

SCANALOGIC 2 PRO

Scanalogic 2 has been discontinued and is due to be replaced by a new ScanaQuad series of Logic Analyzers and Signal generators. Unfortunately, these won't be available until September 2015.

Scanalogic-2 PRO is a Logic Analyzer and Digital signal generator, specially designed to decode and analyze serial protocols like SPI, I2C, UART and CAN. Just plug it to a USB port to record, visualize and analyze signals of electronic circuits via a free user friendly software.

Scanalogic-2 PRO Hardware Specifications

  • Input voltage range: -0.7 to 5.5V
  • Supports 1.8V, 2.8V, 3.3V and 5V logic levels
  • Works on USB (1 & 2) without any drivers needed
  • 20 million samples per second
  • 256K sampling buffer per channel
  • 4 channels capture / record
  • 4 channels generate / playback
  • 2 channels record + 2 channels playback
  • Trigger position from 0% to 100% of sampling depth
  • Trigger on falling edge, rising edge or Logic state change
  • Firmware upgradable
  • Live scrolling mode with 50, 100 and 250ms refresh rate

Scanalogic-2 PRO Software Specifications

  • Mouse-wheel zooming and panning
  • Unlimited markers and time measurements
  • Decoding:
    (More protocols are deployed regularly with the FREE software updates)
    • UART
    • SPI
    • I2C
    • 1-wire
    • CAN bus
    • LIN 1.x & LIN 2.x
    • Maple bus
    • Manchester code
  • Data generator allowing you to generate different types of sequences
  • Flexible 4 channel PWM and FM sequence generator
    (Variable Phase, Envelope and carrier)
  • Save/load captured data for later analysis
  • Save/load captured data for later playback
  • Image export feature to facilitate technical report writing
  • FFT (Fast Fourier Transformation) allowing in depth frequency analysis
  • Software update feature for future upgrades
  • Dual data view mode (to compare between two data captures)

The Scanalogic-2 Pro is one of the simplest devices to use, easily mastered by beginners and professionals. The PC software features all the scrolling and navigation options you would expect from any professional software. It introduces a new useful feature, that we called the mixed mode, allowing you to generate/playback digital signals, while recording the response on other channels, all at the same time! We have made a lot of efforts to keep this product affordable for most students and hobbyists.

The user interface is as intuitive as you would expect. Right-clicks here and there gives you the options you'd expect, like to add a marker, move it or delete it. Navigating through the chart area makes use of the mouse wheel to zoom in and out. You can even hold the CTRL key to zoom in and out faster! Left mouse button lets you pan the waveform right and left.

Scanalogic 2 Pro Software

You can Capture and analyze signals!

Serial protocols sampling, decoding, debugging and analysis (like UART, SPI, CAN, LIN, I2C, 1-Wire, Manchester, maple bus...).

Analysis of PWM signals, their frequencies and envelopes (Using the Fourier analysis feature).

Monitor logic changes on digital signal lines.

Store the captured data on files, to send them over the internet to other users or for later playback!

Capture images of the signals with all the timings, decoded data and markers.

Dual View features allows you can easily visually compare different data captures.

Record serial data and play it back, as simply as you would record & playback a speech!


You can Generate your own data!

Generate PWM (pulse width modulation) signals to control motors drivers, RGB LEDs or other devices.
Generate FM (frequency modulation) signals. Can be used to test speakers or for ultrasound detection systems testing.
Generate Serial data and pulses sequences to test your equipment/project using a very user friendly syntax.

Example showing the usage of the "byte watch" feature, highlighting the bytes corresponding to the characters 'A', 'V' and 'R'. You can also notice that yet another colors profile is used.

With all these features, SCANALOGIC 2 will become an indispensable lab tool that you will cary everywhere! Download the software to try it now!

Documents

Scanalogic Manual (PDF)

Watch the Video Below to see what you can do with the Scanalogic 2

 

Write Review
Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:

SCANALOGIC 2 PRO - PC based logic analyzer and signal generator
Click to enlarge
SCANALOGIC 2 PRO - PC based logic analyzer and signal generator
Click to enlarge
SCANALOGIC 2 PRO - PC based logic analyzer and signal generator
Click to enlarge
SCANALOGIC 2 PRO - PC based logic analyzer and signal generator
$ 54.95 New Out Of Stock
Shopping Cart
0 items
 
DELIVERY/PAYMENT

Free Delivery Orders over £50

UK - £2.40 orders under £50
Airmail from £2.95 (+VAT)
More Details...

 
Brands
 
 Check out our videos
Follow us on:
acebook