USB DIY Connector Shell - Type Micro-B Plug
USB DIY Connector Shell - Type Micro-B Plug
Make your own USB connections without slicing apart a USB cable and soldering those thin wires inside.
Each shell comes with a two-part snap plastic shell and a proper connector with easy-to-solder tabs.
Micro-B Plug
- Max Dimensions: 29mm x 11mm x 8mm
Pinout
Pin | Name | Cable color | Description |
---|---|---|---|
1 | VCC | Red | +5 VDC |
2 | D- | White | Data - |
3 | D+ | Green | Data + |
4 | ID | n/a | USB OTG ID |
5 | GND | Black | Ground |
![]() 4 Core Signal Cable CABLE4 £0.30 |
![]() USB Micro-B Breakout Board R2 BOB-12035 £2.28 |
![]() USB DIY Connector Shell - Type A Socket USBA-DIY-F £0.78 |
![]() USB DIY Connector Shell - Type A Male Plug USBA-DIY £0.78 |
Write Review
Your Name:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:

Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: