RFID Reader Breakout Board

The RFID Reader Breakout is a simple breakout board for our RFID readers.

This board breaks out the 2mm spaced pins to 2 sets of 0.1" spaced headers to give you a choice of connection method

  • 0.1" spaced headers at each side of the board. Ideal for plugging into a breadboard
  • 2x5 row of 0.1" spaced headers in the center of the board. Ideal for IDC ribbon cable connections

Note: If you solder the RFID reader directly to the breakout board the holes for the 0.1" header pins will be covered. Therefore the header pins must be soldered in first. Alternatively, use our RFID Header Sockets then you can simply plug and unplug the RFID reader onto the board when required.

Write a review

Please login or register to review

RFID Reader Breakout Board

  • Manufacturer: HobbyTronics
  • Product Code: RFID-BB
  • Availability:  346
      - Backorder not allowed
  • £0.78

  • Ex Tax: £0.65

Related Products

RFID Reader ID-12LA (125 kHz)

RFID Reader ID-12LA (125 kHz)

RFID Reader ID-12LA (125 kHz) RFID (radio-frequency identification) is the wireless non-conta..

£27.60 Ex Tax: £23.00

RFID Reader ID-20LA (125 kHz)

RFID Reader ID-20LA (125 kHz)

RFID Reader ID-20LA (125 kHz) RFID (radio-frequency identification) is the wireless non-conta..

£29.88 Ex Tax: £24.90

RFID Header Sockets 2mm (pair)

RFID Header Sockets 2mm (pair)

RFID Header Sockets 2mm (pair) This is pair of 2mm header sockets (one 7 way and one 5 way) t..

£0.45 Ex Tax: £0.38